For a pdf of the LP3 Data Sheet, click on the 'Download' button below.
|
Date added: | 01/03/2009 |
Date modified: | 02/07/2013 |
Filesize: | 697.34 kB |
Downloads: | 9875 |
• 8 Tank Multiple Channel Capacity
• Direct Entry of Digital Setpoints
• Dual SPDT Controller Relays per Channel
LP2 SP indicators provide continuous measurement of liquid inventory in storage or processing tanks. Calculating level on the basis of hydrostatic pressure created by liquid depth, the system measures total product mass for more precise material accounting. A full numeric keypad and function keys support various user selections, including direct entry of control setpoints (high or low level) for each tank. The two line alphanumeric LCD readout shows tank level, readout unit (user selective), tank name. and specific gravity in the normal display mode.
The LP2 SP models add functionality of digital setpoints for simple level monitoring and basic control solution for many applications. These indicators support digital RS-485 communications to a central control system while allowing limited local control to production personnel. LP2 SP provides the user with two (2) fully independent SPDT relays per tank input channel. The hardware configuration includes normally-open (NO), normallyclosed (NC), and common (C) relay contacts. Factory programming options include standard LOW-HIGH (descending/ascending) or HIGH-HIGH (ascending/ascending) setpoint actuation.
For a pdf of the LP2 SP Data Sheet, click the 'Download' button below.
LP2 Single Tank Level Indicator
Date added: | 05/08/2012 |
Date modified: | 05/19/2012 |
Filesize: | 615.37 kB |
Downloads: | 9825 |
• Direct Volumetric Display of Tank Content
• No User Scaling or Profiling
• Dual RS-485 Serial Ports (Digital Output)
LP2 Model 4640 indicators provide continuous measurement of liquid inventory in storage or processing tanks. The LP2 indicator expresses output directly in engineering units. A factory programmed capacity profile (Datapack iButton) correlates transmitter output to actual tank geometry. The indicator then displays the resulting value directly as total weight or volume of liquid in the tank.
The LP2 indicator reads the proportional 4-20 mA signal from a liquid level transmitter. The actual sensor used to detect hydrostatic pressure created by liquid depth can be either electronic or pneumatic (using an electronic pressure transmitter to convert the sensor's pneumatic signal into 4-20 mA output). LP2 also supports digital communications output via multiple RS485 serial ports using Modbus RTU or generic ASCII character strings.
For a pdf of the LP2 Single Tank Data Sheet, click the 'Download' button below.
LP2 Multiple Tank Digital Indicator
Date added: | 01/02/2009 |
Date modified: | 10/10/2012 |
Filesize: | 679.91 kB |
Downloads: | 10996 |
• 8 Tank Multiple Channel Capacity
• Operator Interface Display & Keypad
• RS-485 Multidrop Communications
LP2 Multiple Tank Indicators expresses tank level directly in engineering units. Referencing a capacity profile to correlate transmitter output to actual tank geometry, the indicator formats the resulting value directly as the total weight or volume of liquid in the tank. LP2 Multiple Tank Indicator provides an operator interface keypad for access to function selection and density adjustments. There are no user conversion factors involved or scaling points to enter. All application details are factory programmed into an innovative nonvolatile modular memory called the Datapack iButton.
LP2 multiple tank indicators accept up to eight input channels that receive proportional 4-20 mA signals from liquid level transmitters. The actual sensor used to detect hydrostatic pressure created by liquid depth can be either electronic or pneumatic (using an electronic pressure transmitter to convert the sensor's pneumatic signal into 4-20 mA output).
LP2 multiple tank indicators can be used to eliminate analog I/O at your PLC or PC-based control system. As data acquisition hubs, each LP2 tank level indicator provides multiple point serial communications. An expandable network of up to 32 discrete indicators can be installed on a single two wire network (RS-485) for total of 256 possible input channels. Dual serial ports support multiple network configurations including query-response communications with a computer (or PLC), remote satellite displays, or interface to a KING-GAGE® LP3 system.
For a pdf of the LP2 Data Sheet, click on the 'Download' button below.
LevelBAR Tank Level Indicator
Date added: | 01/05/2009 |
Date modified: | 02/07/2013 |
Filesize: | 1.29 MB |
Downloads: | 11543 |
• Visual Display of Tank Levels
• Custom Scale for Weight or Volume
• Direct Replacement for Manometer Gauges
• 4-20 mA output signal available to PLC
The LevelBAR multi-segment LED column display includes an individualized scale calibrated to the actual tank capacity. Marked in any specified unit(s) of measurement, it permits direct reading of total liquid weight or volume. This unique analog column indicator works as a local or auxiliary remote display in new or retrofit applications.
Pneumatic input models include an integrated differential pressure (D/P) element. This allows LevelBAR to be used with bubblers or other air operated systems as a direct replacement for mercury tank gauges or other fluid-filled manometers. It even provides 4-20 mA output compatible with other receivers or to use for process control functions.
For a pdf of the LevelBAR Data Sheet, click the 'Download' button below.
KING ENGINEERING
8019 Ohio River Blvd
PO Box 305
Newell WV 26050 USA
Phone
855-367-2494
304-387-1200
Fax
304-387-4417
© 2017 ATC King Engineering Division
Part of the Marsh Bellofram
Group of Companies
Search
