Liquid Level Transmitters

Documents

Order by : Name | Date | Hits [ Ascendant ]

LevelWAV level radar LevelWAV level radar

Date added: 08/09/2017
Date modified: 08/09/2017
Filesize: 654.3 kB
Downloads: 502

• Advanced Smart Radar Improves Reliability
• Compact Size for New or Retrofit Applications
• Sanitary Configurations for Food & Dairy

KING-GAGE® LevelWAV is suitable to a broad range of level measurement and control applications including process conditions exhibiting visible vapors, foam, high termperature and/or pressure. Level measurement is possible for highly corrosive materials (caustics, acids, solvents) and slurries.

With no moving parts or direct product contact, LevelWAV transmitters eliminate the maintenance requirements of other level technologies. The compact size and mounting footprint makes tank top mounting suitable for even tight spaces. Radar level measurement is a practical solution in retrofit applications to replace failing or erratic level transmitters. Model offerings include sanitary configurations with stainless steel construction and food-grade PTFE antenna (Tri-Clamp mountings available).

Applications include food/beverage, pharmaceutical, pulp/paper, water/wastewater and chemical processing.

For a pdf of the TeleSensor Data Sheet, click the 'Download' button below.

AcraSensor AcraSensor

Date added: 05/18/2012
Date modified: 08/09/2017
Filesize: 819.18 kB
Downloads: 7018

acrasensor

• Flush Mount Sanitary Design
• Field Replaceable Sensor Diaphragm
• Hybrid Design Minimizes Temperature Effects

KING-GAGE® AcraSensor unit detects level by sensing pressure due to liquid depth while its pneumatic force balance diaphragm technique is remarkably free from drift or temperature effects. These sensors are especially suited to a wide range of sanitary applications on storage or continuous processing vessels. The standard AcraSensor + 868 D/P Sensor Control combination combines accuracy, rugged durability, reduced maintenance, and long term stability for liquid level tank gauging. Its integral transmitter converts the pneumatic isolation pressure to a proportional 4-20 mAdc signal suitable for process control or remote level indication.

The unique AcraSensor titanium diaphragm satisfies the 3-A Sanitary Standard (74-03) and is appropriate for flush mount, clean-in-place installation. An FDA-approved silicone rubber O-ring seal forms a crevice-free, positive compression seal between the diaphragm probe and mounting shell. Flush weld mountings are available with product contact surfaces of 316L stainless.

Operation requires pneumatic 860 Sensor Control or 868 D/P Sensor Control electronic transmitter and compressed air/gas supply.

acra868system-white

 

 

 

1100-25thumb

For a pdf of the AcraSensor Data Sheet, click the 'Download' button below.

TeleSensor TeleSensor

Date added: 05/08/2012
Date modified: 02/15/2013
Filesize: 958 kB
Downloads: 9313

telesensor

•  External Mounting at Tank
•  Unaffected by Foam or Vapor
•  Electronic (4-20 mA) or Pneumatic Output

KING-GAGE® TeleSensor detects level by sensing hydrostatic pressure created by liquid depth. Acting on the force balance principle, a sensitive diaphragm is exposed to the liquid contents of the tank. Compressed air within the sensor creates a pneumatic pressure that balances the force of the liquid acting against the diaphragm. This diaphragm unit is generally paired with the 868 D/P Sensor Control with integral transmitter. This converts the pneumatic isolation pressure to a proportional 4-20 mAdc signal suitable for process control or remote level indication.

The basic configuration is intended for pipe flange connection mounting (2", 3" or 4" class 150 ANSI) to any typical outlet near the bottom of the tank. TeleSensor units are virtually free from long term drift, hysteresis, and temperature sensitivity unlike strain measurements (including load cells) since mechanical deflection of the diaphragm is not directly measured. Additionally, pressure based measurement is unaffected by liquid foam or vapor layers within the tank.

KING-GAGE TeleSensor units combine accuracy, rugged durability, reduced maintenance, and long term stability for liquid level tank gauging. A compressed air/gas supply is required for operation of the sensor. Entirely pneumatic versions are available for use in hazardous area service eliminating need for additional intrinsic safety provisions.

telesensorsystem

1100-20_telesensor-thumb

For a pdf of the TeleSensor Data Sheet, click the 'Download' button below.

ES2 Slimline Transmitter ES2 Slimline Transmitter

Date added: 05/08/2012
Date modified: 05/19/2012
Filesize: 838.55 kB
Downloads: 9288

es2slimline

•  Robust protection in washdown environments
•  Continuous liquid level measurement
•  Two wire loop powered (4-20 mA)

KING-GAGE® ES2 transmitters provide liquid level measurement for inventory monitoring. Add to their rugged reliability the major benefits of simplified service and maintenance. Performance characteristics of these transmitters include excellent stability and repeatability (better than 0.02% FS). Transmitter span accommodates a 3:1 turndown ratio* to match the application pressure range (i.e. tank depth) and the 4-20 mAdc output is compatible with PLCs or other control architecture using analog I/O.

KING-GAGE ES2 transmitters are applicable to most tanks or process vessels whose contents remain at normal atmospheric pressure. They measure hydrostatic head pressure created by liquid depth in the tank and are unaffected by foaming or internal obstructions such as agitators. Unlike load cells, pressure based measurement has lower installation cost and is far simpler to maintain thus ensuring more reliable readings.

Transmitters used in sanitary processing must often endure cycles of rapid temperature fluctuation. Washdown environments produce significant condensation on metallic surfaces that coupled with aggressive cleansing agents demand robust protection for these instruments. The ES2 transmitter's enhanced design uses encapsulation for full isolation of the internal electronics. This extends to the IP68 grade M12 signal connector that ensure integrity and long term reliability. You can be assured of a transmitter truly built for the demands and expectations of today's processing environment.

Sanitary Configurations
These sensors are especially suited to a wide range of sanitary applications on storage or continuous processing vessels. The 316 stainless diaphragm is appropriate for flush mount, clean-in-place installation employing an FDA-approved silicone rubber O-ring seal to achieve the crevice-free, positive compression seal between diaphragm and tank liner. Sanitary tank mountings include flush weld mountings with product contact surfaces of 316L stainless. (Quick disconnect sanitary adapters are also available for sensor mounting.)

*3:1 turndown ratio is applicable to 0-10 and 0-30 nominal range, refer to specifications for detailed span adjustment available on specific range models.

1100-34_es2slim

For a pdf of the ES2 Data Sheet, click on the 'Dowload' button below.

Downpipe Check Valve Downpipe Check Valve

Date added: 04/19/2010
Date modified: 02/15/2013
Filesize: 550.69 kB
Downloads: 4812

downpipevalve

• Simple Inline Installation
• Float Check Avoids Pressure Drop
• Guards Against Siphoning From Tank

This engineered component will help you prevent siphoning or backflow of liquid through a downpipe installed in tank level gauging applications. With the KING-GAGE® Downpipe Backflow Check Valve, you can guard against liquid traveling up through the downpipe and into the system pressure lines. It utilizes a specially designed float pin that rises up to seal the valve shut when liquid enters from the downpipe through the bottom of the unit. The Model 6563 Downpipe Check Valve is well suited for use on downpipe systems employing KING-GAGE Purge Control or LiquiSeal Purge Control liquid level transmitters.

1200-30_downpipecheck-datathumb

For a pdf of the Downpipe Check Valve Data Sheet, click the 'Download' button below.

<< Start < Prev 1 2 Next > End >>
Page 1 of 2